07-06-2010 08:55 PM - edited 03-06-2019 11:55 AM
Hi,
I'm completing my first vss software upgrade with efsu. I followed the procedures but I'm getting an error message when trying to load the issu loadversion command. (must be named first in BOOT [ bootdisk: ]). The current running image is located in BOOT variable = sup-bootdisk:,1; and I've placed the new image in sup-bootdisk:s72033-adventerprisek9_wan-mz.122-33.SXI3.bin and on disk0:, slavedisk0:, slavesup-bootdisk:
Do I need to delete the current s72033-ipbase-mz.122-33.SXI2a.bin image from sup-bootdisk & slavesup-bootdisk in order for it to work ?
The documentation states not to change any bootvariables when using efsu.
Your help is greatly appreciated.
Regards,
Dave
07-06-2010 09:39 PM
Make sure that the current image is configured on the switch
boot system flash sup-bootdisk:s72033-ipbase-mz.122-33.SXI2a.bin
look at this post.
07-07-2010 03:31 AM
Thanks. I had a look at that post before I posted and I guess making changes to the boot variable in this case is acceptable. I will give it a try morning. Many Thanks !
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: