Hello, has anyone successfully
usedlacp to connect to an Enterasys C2 (or A2 for that matter) switch? The connection works from the 3650 to a 3550. The Enterasys lag works from the C2 to an A2 but when I try to connect the 3750 to the C2 the port-channel won't come up.
core#sh ether 1 detail
Group state = L2
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 16
Protocol: LACP
Ports in the group:
-------------------
Port: Gi1/0/47
------------
Port state = Up Sngl-port-Bndl Mstr Not-in-Bndl
Channel group = 1 Mode = Active Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po1
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi1/0/47 SA indep 32768 0x1 0x1 0x2F 0x7D
Age of the port in the current state: 0d:00h:01m:19s
Port: Gi1/0/48
------------
Port state = Up Sngl-port-Bndl Mstr Not-in-Bndl
Channel group = 1 Mode = Active Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po1
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi1/0/48 SA indep 32768 0x1 0x1 0x30 0x7D
Age of the port in the current state: 0d:00h:01m:15s
Port-channels in the group:
---------------------------
Port-channel: Po1 (Primary Aggregator)
------------
Age of the Port-channel = 0d:01h:16m:00s
Logical slot/port = 10/1 Number of ports = 0
HotStandBy port = null
Port state = Port-channel Ag-Not-Inuse
Protocol = LACP
Time since last port bundled: 0d:00h:09m:18s Gi1/0/47
Time since last port Un-bundled: 0d:00h:06m:46s Gi1/0/47
core#
Any ideas?
Thanks