12-15-2020 06:16 AM
I need to configure LACP between Cisco ASR 9006 and Huawei device. But I couldn't found any doc or related material.
Can find LACP between normal cisco ios and Huawei configurations over the Internet. Not with IOS-XR.
Please help...
Solved! Go to Solution.
12-15-2020 06:49 AM
IOS XR bit different core :
you can start from below :
https://fryguy.net/2012/04/27/cisco-ios-xr-interface-bundles-aka-etherchannel-or-802-3ad/
12-16-2020 02:25 AM
Alwys Port-channel recommended to be 2-4-8-10 is good to balance between chassis (odd number not recommended)
this document still valid how the Loadbalance works in basic.
https://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
post the config and out put of below to understand :
show bundle bundle-ether X (where X is your channel number)
show bundle status
12-15-2020 06:49 AM
IOS XR bit different core :
you can start from below :
https://fryguy.net/2012/04/27/cisco-ios-xr-interface-bundles-aka-etherchannel-or-802-3ad/
12-15-2020 07:21 PM
Thanks Balaji
12-15-2020 07:29 PM
Hi Balaji,
We have configured the LACP.
There are 3 links (10G) with LACP mode on. When we monitor the traffics over the links we have found that some traffics unbalances.
link 1: 8G
link 2 : 8G
link 3 : 3G
What can be the cause for this?
12-16-2020 02:25 AM
Alwys Port-channel recommended to be 2-4-8-10 is good to balance between chassis (odd number not recommended)
this document still valid how the Loadbalance works in basic.
https://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
post the config and out put of below to understand :
show bundle bundle-ether X (where X is your channel number)
show bundle status
12-17-2020 05:24 AM
Thanks Balaji for your support
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: