12-15-2020 06:16 AM
I need to configure LACP between Cisco ASR 9006 and Huawei device. But I couldn't found any doc or related material.
Can find LACP between normal cisco ios and Huawei configurations over the Internet. Not with IOS-XR.
Please help...
Solved! Go to Solution.
12-15-2020 06:49 AM
IOS XR bit different core :
you can start from below :
https://fryguy.net/2012/04/27/cisco-ios-xr-interface-bundles-aka-etherchannel-or-802-3ad/
12-16-2020 02:25 AM
Alwys Port-channel recommended to be 2-4-8-10 is good to balance between chassis (odd number not recommended)
this document still valid how the Loadbalance works in basic.
https://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
post the config and out put of below to understand :
show bundle bundle-ether X (where X is your channel number)
show bundle status
12-15-2020 06:49 AM
IOS XR bit different core :
you can start from below :
https://fryguy.net/2012/04/27/cisco-ios-xr-interface-bundles-aka-etherchannel-or-802-3ad/
12-15-2020 07:21 PM
Thanks Balaji
12-15-2020 07:29 PM
Hi Balaji,
We have configured the LACP.
There are 3 links (10G) with LACP mode on. When we monitor the traffics over the links we have found that some traffics unbalances.
link 1: 8G
link 2 : 8G
link 3 : 3G
What can be the cause for this?
12-16-2020 02:25 AM
Alwys Port-channel recommended to be 2-4-8-10 is good to balance between chassis (odd number not recommended)
this document still valid how the Loadbalance works in basic.
https://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
post the config and out put of below to understand :
show bundle bundle-ether X (where X is your channel number)
show bundle status
12-17-2020 05:24 AM
Thanks Balaji for your support
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide