03-25-2020 03:27 AM
Hello,
I have just bought a new Cisco WS-C2960L-16PS-LL switch, but this one encounters an error that I cannot resolve.
I have cameras, AP and computer connected to it, the traffic is therefore heavy and the LEDs are supposed to flash very quickly.
This is not the case, because all the LEDs of the connected equipment flash once per second.
Anyone has an idea ?
Thank you in advance and have a good day
Solved! Go to Solution.
03-26-2020 02:10 AM
Hi @Ipefixe ,
Here is some cisco documentation about the LED indicators in the different modes (Cisco switch 9200):
And here is a discussion from 2018 for the cisco switch 2960x LED indicators:
https://community.cisco.com/t5/switching/2960x-syst-led/td-p/3413770
Hope this helps, regards!
03-25-2020 03:55 AM
- Shouldn't worry too much if the camera's work normally, on some models the traffic indicating patterns have been modified and or are more relaxing,
M.
03-26-2020 02:10 AM
Hi @Ipefixe ,
Here is some cisco documentation about the LED indicators in the different modes (Cisco switch 9200):
And here is a discussion from 2018 for the cisco switch 2960x LED indicators:
https://community.cisco.com/t5/switching/2960x-syst-led/td-p/3413770
Hope this helps, regards!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide