06-10-2013 01:47 AM - edited 03-07-2019 01:48 PM
06-10-2013 02:05 AM
It should be 2.3 ft.(69cm)
Power cable - IEC 320 EN 60320 C14 - IEC 320 EN 60320 C15 - 2.3 ft - for MDS 9020, 9120, 9140, 9216, 9216A, 9216i
HTH
Regards
Inayath
*Plz rate if this info is helpfull.
06-10-2013 02:05 AM
It should be 2.3 ft.(69cm)
Power cable - IEC 320 EN 60320 C14 - IEC 320 EN 60320 C15 - 2.3 ft - for MDS 9020, 9120, 9140, 9216, 9216A, 9216i
HTH
Regards
Inayath
*Plz rate if this info is helpfull.
06-10-2013 02:48 AM
Thanks for the info...
06-10-2013 03:22 AM
Why a low rating of 3 to an answer 100% correct and made with the will to help !?! That should never be done!
I've re-rated the posting to partially compensate.
06-10-2013 03:23 AM
Thanks Paolo.
06-10-2013 04:02 AM
Hi, Paolo...Please look PM...
01-11-2023 01:31 AM
The low rating may be because two values appear, depending where you look - 69cm/2.3ft or 1.22m/4ft. It is possible they have supplied 69cm ones in the past, but the ones supplied over the past few years are 1.22m/4ft
CAB-C15-CBN is 1.22m/4ft (just confirmed with the aid of a tape measure)
(CAB-C15-CBN-CK, CAB-C15-CBN-JP and CABC15-CBN-EURA appear to be 3m/9.1ft)
05-31-2017 12:55 AM
Is there an alternative part code for a longer cable ( same connectors ) ?
02-24-2018 09:54 AM
Try third part ENET - CAB-C15-CBN-6F-ENC
11-17-2020 11:14 AM
01-06-2021 03:38 AM
That is right, CAB-C15-CBN is 1.22m in length.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: