cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
431
Views
0
Helpful
1
Replies

Limite VLAN Bandwidth oN switch 2960

Hi Dear friend my Question is

How limite VLAN TX OR RX (bandwidth) on switch layer 2 cisco For example 2960

 

I used Srr queue But this is not work !

 

Please Help me

1 ACCEPTED SOLUTION

Accepted Solutions
Georg Pauwen
VIP Expert

Hello,

 

I think QoS on the 2960 is only supported on physical ports, not at the VLAN level...

 

Either way, how did you configure the SRR ? Below is an example where you would limit the bandwidth to 10 percent of the physical bandwidth:

 

interface GigabitEthernet1/0/3
srr-queue bandwidth limit 10

View solution in original post

1 REPLY 1
Georg Pauwen
VIP Expert

Hello,

 

I think QoS on the 2960 is only supported on physical ports, not at the VLAN level...

 

Either way, how did you configure the SRR ? Below is an example where you would limit the bandwidth to 10 percent of the physical bandwidth:

 

interface GigabitEthernet1/0/3
srr-queue bandwidth limit 10

View solution in original post