Link Aggregation in Cisco 3850X

[Herald Sison]

Hi Gents,

may i ask if i configured my LACP properly in my cisco core switch? 

here is my configuration screenshot below.

i have port-channel50 for my ESXi server and specifies it under vlan11 and only using mode access (not trunk) and also the 2 gig port under LACP. port 38 and 39.

when i ran the command show int port-channel 50 i can see that the state is down.

but when i ran the command show int gig for both the ports included in the LACP group i can see that there are packets coming in and received so for me the LACP worked but it is very confusing why the interface port-channel is down.

here are some additonal info for my ethernchannel

any help on this if this is normal?

thank you

[Flavio Miranda · Accepted solution]

Hi

 It seems that both device did not agree on the negotiation. If you did right on the ESXi side, then, try to change from desirable to mode on. 

[Herald Sison]

i have configured NIC Teaming on the ESXi side. i will try your suggestion to change mode to on.

[Herald Sison]

Hi Sir, update:

i have changed to mode on on both ports and i can now see that the port-channel 50 is up.

Thank you so much

[MHM Cisco World · Accepted solution]

https://www.mustbegeek.com/configure-nic-teaming-in-esxi-server/

link how you can solve it.