11-05-2019 12:27 PM
Hi everybody,
I have a switch C2960X with system image file: c2960x-universalk9-mz.152-4.E8.
I can not connect it remotely with putty.
It will be appreciated any help.
Thanks,
11-05-2019 12:52 PM
Hi Sarah,
Can you connect to it using a console cable and the console port?
HTH
11-05-2019 03:46 PM
11-05-2019 05:49 PM
Hi,
Ok, great. Now, can you connect a PC/laptop to one of the ports, make sure the port is in the correct vlan, give the PC/laptop an IP and try to connect to the switch using telnet?
HTH
11-05-2019 06:12 PM
11-06-2019 03:32 AM
11-06-2019 04:27 AM
11-06-2019 04:44 AM
Is ping successful to that switch ..? If yes , there might be some issues in acl or vty configurations..! try to double check acl and vty configurations.
11-06-2019 04:53 AM
Can you try to login using console port or telnet and post running configurations so that we can take a look on them
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide