cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
208
Views
0
Helpful
8
Replies
Sarah49
Beginner

login fails

Hi everybody,

I have a switch C2960X with system image file: c2960x-universalk9-mz.152-4.E8.

I can not connect it remotely with putty. 

It will be appreciated any help. 

 

Thanks,

8 REPLIES 8
Reza Sharifi
Hall of Fame Expert

Hi Sarah,

 

Can you connect to it using a console cable and the console port?

HTH

Hi,
Yes I can connect via console cable.

Thanks
Reza Sharifi
Hall of Fame Expert

Hi,

Ok, great. Now, can you connect a PC/laptop to one of the ports, make sure the port is in the correct vlan, give the PC/laptop an IP and try to connect to the switch using telnet?

HTH

Hi again,

Thank you for following up. In fact I did it and I can connect to it with a
PC but I want to connect to it remotely using putty via ssh.
Best,

Is SSH enabled on that switch..?

Hi,

Yes ssh v2 is enabled.
Thanks,

Is ping successful to that switch ..? If yes , there might be some issues in acl or vty configurations..! try to double check acl and vty configurations.

Can you try to login using console port or telnet and post running configurations so that we can take a look on them