04-10-2017 05:33 AM - edited 03-08-2019 10:08 AM
Hi,
I have 2 cisco 3750 switches not stacked, each with its own config but I would like to stack them. If I shut them off, put in the cables together and boot up, would I lose the configs of both switches and have to reconfigure the switches? TIA.
Solved! Go to Solution.
04-10-2017 05:56 AM
You'll "lose" the config of the 2nd switch that joins the stack.
The 2nd switch will appear as another set of ports that you can configure.
04-10-2017 05:56 AM
You'll "lose" the config of the 2nd switch that joins the stack.
The 2nd switch will appear as another set of ports that you can configure.
04-10-2017 06:43 AM
Thanks for that information.
04-10-2017 06:45 AM
Hi,
Use this guide to build your stack. It is probably a good idea to backup your config as port assignment will change. Also, you may need to modify your config, copy and paste it back to the switch after the stacking is done.
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#anc14
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: