11-02-2012 02:23 AM - edited 03-07-2019 09:49 AM
hi ;
i have created macl on cisco 3750 but it's not working ?
are there any limitations about 3750 or mac acl ?
what is wrong ?
my config is
mac access-list extended macbased
deny any any
interface GigabitEthernet1/0/40
switchport access vlan 33
switchport mode access
mac access-group macbased in
DemoSwitch#sho mac access-group inte gi 1/0/40
Interface GigabitEthernet1/0/40:
Inbound access-list is macbased
Outbound access-list is not set
Solved! Go to Solution.
11-02-2012 06:08 AM
Hi,
MAC ACLs only filter non IP traffic.
Regards.
Alain
Don't forget to rate helpful posts.
11-02-2012 05:12 AM
Hi,
Your config is correct. Try passing traffic through port 1/0/40. It should be denied.
HTH
11-02-2012 05:59 AM
Hi ;
Traffic passes through , acl is not working.
can you test your lab enviroment bs config is simple but does not work.
Thanks for help
11-02-2012 06:08 AM
Hi,
MAC ACLs only filter non IP traffic.
Regards.
Alain
Don't forget to rate helpful posts.
11-04-2012 08:38 AM
Thanks Cadet ;
in fact arp packcets are not ip packet , after i applied acl , client would not solve arp table so could not ping .
but arp request is working
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide