MAC based VLAN

[vijaykhapekar]

Hello,

I have Cisco 3750 L3 switch and 2960 L2 switch and want to create MAC based VLAN with this. I wanted to know how do I proceed? What do I need to configure to support MAC based VLAN.

[Dennis Mink]

Can you explain what you mean by "a MAC based VLAN". because all VLANs are essentially MAC based

=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

[vijaykhapekar]

I don't want to use port based VLAN. Membership should be decided on MAC address of device. Suppose I have laptop user who keeps on moving on the floor, so wherever he sits he should get his VLAN.

[cadet alain]

Hi,

You can use dot1x with dynamic vlan assignement:http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_13_ea1/configuration/guide/Sw8021x.html#wp1049882

Regards

Alain

Don't forget to rate helpful posts.