05-04-2012 02:15 PM - edited 03-07-2019 06:31 AM
I have a ME-3600X-24TS-M whit these IOS and license
Switch#show version
Cisco IOS Software, ME360x Software (ME360x-UNIVERSAL-M), Version 12.2(52)EY3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 29-Sep-11 14:49 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x0208EA48
ROM: Bootstrap program is WHALES boot loader
BOOTLDR: ME360x Boot Loader (ME360X-HBOOT-M), Version 12.2 [sourdutt-loader_release_ledfix 100]
Switch uptime is 7 minutes
System returned to ROM by power-on
System image file is "flash:/me360x-universal-mz.122-52.EY3/me360x-universal-mz.122-52.EY3.bin"
License Level: MetroIPAccess
License Type: Permanent
Next reload license Level: MetroIPAccess
What I need to support MPLS in this switch??
05-04-2012 02:26 PM
Hi,
Your image with Metro IP Access license support MPLS. You are good to go.
Have a look at table-2 in this link.
HTH
05-31-2012 04:55 AM
Hi Reza,
looking at the table you mentioned, my understanding is that you need ADVANCED Metro IP Access license to support MPLS.
Do you know if ME3660 supports MPLS over GRE and VPLS?
Thanks.
Gio.
05-31-2012 05:03 AM
Hi Luis,
The Advanced Metro IP Access license adds the following capabilities to the METRO IP ACCESS image: MPLS, EoMPLS pseudowires, Virtual Private Lan Services (VPLS), MPLS traffic engineering, Fast Reroute (FRR) and MPLS VPN support.
Kind Regards,
Ivan
**Please grade this post if you find it useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide