To test further, you should create an access list and log on that. You should start seeing entries. The problem is that generating traffic doesn't get logged by default unless there's an issue to log. You can create an acl and log icmp traffic like this:
access-list 101 permit icmp host 10.10.10.10 any log
access-list 101 permi ip any any
ip access-group 101 in
Now if you ping anything from the 10.10.10.10 host, you should see some entries in the log.
Cisco SD-Access 126.96.36.199 Features OverviewBorder handoff enhancements: 4-byte ASNEmbedded wireless support on Fabric edgeFiaB deployment models:Multiple VN for Guest Access in Cisco SD-AccessCisco SD-Access Group-Based Access Control PolicyCisco SD-Access ...
. My work contains abbundance of networking gear.i have 3945 routers with attatched nme,3850 switches 48 gig port with 4 tengig port,3850 switch with 16 fiber ports, fortigate 600d along with servers with 8tbs of free space.if you have any labs for me id ...
Hello I have a network in prodcution like it mensionned in this picture. The customer wants to renovate the current infrastructure by changing all the hardware. For this reason we had think about deploying DNA Center and make automat...
I want to show how to quickly and reliably troubleshoot a network using notepad++.If you are not using Cisco GENIE and your network is not very big and you have several routers/switches only.For illustration, I created a simple topology.First, the loopbac...
Join us on Tuesday, October 15 at 10:00 am PT to to learn how Equinix and Cisco enable multicloud and Hybrid IT access.
Digital transformation initiatives are driving the adoption of internet, cloud, mobile and IoT technologies. In order t...