11-04-2015 03:19 AM - edited 03-08-2019 02:34 AM
I have router isr4331 with SM-X-ES3-16-P module
I connnect a switch 2960 with isr4331 through SM-X-ES3-16-P module by port 16
the connection between switch 2960 (vlan 1 ip :192.168.11.254/24) and module switch SM-X-ES3-16-P ( int vlan 1: 192.168.11.250/24)
but I cant connect from router ( int vlan 1 ip: 192.168.11.1/24) to module switch through vlan 1
config on module switch SM-X-ES3-16-P :
interface GigabitEthernet0/16
description *** connect to sw 2960 ***
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet0/17
switchport protected
!
interface GigabitEthernet0/18
switchport trunk encapsulation dot1q
switchport mode trunk
switchport protected
!
interface Vlan1
ip address 192.168.11.10 255.255.255.0
config on isr4331:
interface Ethernet-Internal1/0/0
no negotiation auto
service instance 1 ethernet
!
service instance 1 ethernet
encapsulation dot1q 1
rewrite ingress tag pop 1 symmetric
bridge-domain 1 split-horizon group 0
interface BDI1
ip address 192.168.11.1 255.255.255.0
If I config int vlan 1 on isr4331 have ip 192.168.11.1/24, the same problem happen.
I config the same way with other vlan and they work without problem
I havent seen many documents about this switch module
could you help me check the problem
Thank you!
11-04-2015 05:34 PM
up
04-28-2017 02:41 PM
How did you fix it? If you can remember.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: