cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
374
Views
0
Helpful
2
Replies

mp-bgp redistribution

amit bhatnagar
Level 1
Level 1

We have two sides we have configured iBGP between the two sides and there are same VRF's working on both sides , for which we want communication to work
also there are few static routes and ospf  on each vrf . on each sides .
when we configure mp-bgp and put below commands the static and ospf communcation , do we need too put commands redistribute static and redistribute ospf , i have been suggested if we do so there is possibilty of black hole . do advise

address-family ipv4 vrf VRF_A
  redistribute connected
exit-address-family

1 Accepted Solution

Accepted Solutions

sharonccie
Level 1
Level 1

there is no two way redistribution rt?

so you can go ahead... else tag the traffic while redistributing and filter the same

View solution in original post

2 Replies 2

sharonccie
Level 1
Level 1

there is no two way redistribution rt?

so you can go ahead... else tag the traffic while redistributing and filter the same

Thanks for reply Sharon , BGP is already getting redistributed in OSPF , so I think I cannot redistribute OSPF in BGP . But I still can redistribute static to mp-BGP.

Review Cisco Networking for a $25 gift card