cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
782
Views
15
Helpful
2
Replies

Multicast and Port Channel

Fernando Soto
Level 1
Level 1

Hi. Sorry for my English

 

I have this problem

I have this switch:  WS-C2960G-24TC-L (c2960-lanbasek9-mz.122-55.SE.bin) 

 

I am injecting  multicast traffic to interface giga0/19, but it does not come out through the interface Port-channel1

 

 

SW1POP36#show ip igmp snooping groups

Vlan      Group                    Type        Version     Port List

-----------------------------------------------------------------------

110       224.120.120.51           igmp        v2          Gi0/19

 

 

This is the configuration:

interface Port-channel1
switchport trunk allowed vlan 100,110
switchport mode trunk
switchport nonegotiate
load-interval 30
speed nonegotiate

 

interface GigabitEthernet0/19

switchport access vlan 110
switchport mode access
switchport nonegotiate
load-interval 30
no cdp enable
spanning-tree portfast

 

 

ip igmp snooping vlan 110 mrouter interface Gi0/19
ip igmp snooping vlan 110 mrouter interface Po1
no ip igmp snooping

 

 

 

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

Switch is running not just an old version but a version "0" (zero). 

Do not expect anything to work correctly with that.  

Fernando Soto
Level 1
Level 1

I configured another single port in access mode vlan 110 and neither traffic go out. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco