05-26-2020 07:52 AM
I'm working on a system that employs (2) IE5000 switches to connect (2) comm rooms. I have a server on each side of the system that uses multicast packets to communicate with other devices on the network.
The issue I'm running into is I cannot seem to get the devices to see the multicast packets; I believe the multicast routing and PIM modes are correct for the interfaces, but clearly I'm missing something. The running configs are attached. Any help or insight would be appreciated.
05-27-2020 06:20 PM
05-28-2020 05:00 AM
Hello, yes the servers are connected with one at each switch location. Yes, the switches are physically connected to each other via a single mode fiber link on port 25 (trunked). One of the servers is on VLAN 10 and the other server is on VLAN 20. I've added an updated config to reflect the VLAN 20 configuration.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide