My Exams need some help!

[justin.lafleur]

Hi,

I have exams right now and i need to know how to fix the following solution:

There's a simulated company which has 3 departments.

So i have 3 VLANs(10, 20 and 30).. But they want redundancy.. so i have 2 switches which are connected to each other.

And i have 1 access point for VLAN 30.

What they want is to have the trunkport on my access point.

How can i configure this ?

Thanks for the help.

- Justin

[Chaitra Shree · Accepted solution]

Hi Justin,

I understand that you need to configure a trunk link to an access point in vlan 30. All that needs to be done on the switch end is to allow only vlan 30 on the trunk:

switchport trunk allowed vlan add 30

The below link might help you in configuring the AP:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml

Regards,

Chaitra

[justin.lafleur]

Yes, but now i need an accesspoint with 5 fast ethernet ports.

Fa0/1 = Trunk

Fa0/2 = switch 1

Fa0/3 = switch 1

Fa0/4 = switch 2

Fa0/5 = switch 2

Wireless = for VLAN 30

And i probably need to user VTP

You have a little idea what i want ?

Switch 1:

Fa0/1-4 = Trunk

Fa0/5 - 15 = VLAN 10

Fa0/15 - 30 = VLAN 20

Fa0/31 - 38 = VLAN 30

Fa0/39 - 48 = Shutdown

Switch 2:

Fa0/1-4 = Trunk

Fa0/5 - 15 = VLAN 10

Fa0/15 - 30 = VLAN 20

Fa0/31 - 38 = VLAN 30

Fa0/39 - 48 = Shutdown

Thanks for your help anyway

[burleyman]

Is this homework for a class you are taking?

Mike

[mikegrous]

You will never learn if we give you the answer