02-03-2015 06:37 AM - edited 03-07-2019 10:29 PM
Hello,
Can someone share a light about N3K-C3064TQ-32T and license restrictions.
As written about this device it has 32 cooper ports available and can be unlocked to 48 via license.
OK, I fine with 32 cooper ports, but I can't understand from docs is there 4 QSFP ports available or I need purchase some license?
I need configure vPC between pair of N3K-C3064TQ-32T and want to use one QSFP port for vPC link and one QSFP + QSFP-4SFP10G-CUxM Passive splitter cable to connect each device to upstream switch which has 10G ports.
Solved! Go to Solution.
02-03-2015 08:10 AM
Hi,
You don't need any license to use the QSFP ports. You can use all 4.
So you can use one or 2 of the QSPF ports and connect the 3ks together for you VPC peer-link and use breakout cables for the other 2 to connect to your 10gig devices.
HTH
02-03-2015 08:10 AM
Hi,
You don't need any license to use the QSFP ports. You can use all 4.
So you can use one or 2 of the QSPF ports and connect the 3ks together for you VPC peer-link and use breakout cables for the other 2 to connect to your 10gig devices.
HTH
02-03-2015 02:20 PM
Hi,
Just so you know, there is a Twinax cable for QSFPs. If your devices are located close to each other (within10 meters) you can use that, as it is much more cost effective than using a regular 40Gig fiber patch.
HTH
02-03-2015 10:26 PM
Thanks, found QSFP-H40G-CUxM
btw, can i use that twinpax cable and breakout QSFP port as 4x10G?
For example i want:
1. Use 3x10G in port-channel as vPC peer-link
2. Use 1x10G as vPC peer-keepalive
In this case I can use one QSFP port for whole vPC.
02-03-2015 09:20 AM
Thank you very much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide