08-09-2012 11:05 AM - edited 03-07-2019 08:15 AM
Group -
Thanks in advance for your assistance. I should know the answer to my question, but for the life of me I can not remember.
When you use the command
switchport trunk allowed vlan add [vlan-id]
There should be no drop in service to the existing VLANs, correct? I am trunking from a 7K to a 2960S via 2G PoCh.
Solved! Go to Solution.
08-09-2012 11:13 AM
That is correct. if you use switchport trunk allowed vlan add [vlan-id] than there is no drop in services.
Be careful not to use this
switchport trunk allowed vlan [vlan-id]
This will delete all the vlans on the trunk and only add the vlan you specify here
HTH
08-09-2012 11:13 AM
That is correct. if you use switchport trunk allowed vlan add [vlan-id] than there is no drop in services.
Be careful not to use this
switchport trunk allowed vlan [vlan-id]
This will delete all the vlans on the trunk and only add the vlan you specify here
HTH
08-09-2012 11:14 AM
Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: