N7K module reset log information

[zhumingfei]

log information：

%MODULE-2-MOD_DIAG_FAIL:Module 9 reported failure Ethernet9/1-4due to EEM Event Uncorrectable ECC Interrupt in device DEV_LAMIRA (device error 0xc510025b)

Who can tell me what caused this?

Help me analyze this log information. Thanks.

[Reza Sharifi]

It appears that the module has failed during the initial diagnostic check.

You may want to open a ticket with TAC and possibly RMA the module.

HTH

[balaji.bandi]

First, i will try to reseat the Module and check is that works, if not as mentioned raise TAC for RMA.