05-02-2011 11:07 PM - edited 03-06-2019 04:52 PM
Hi, does naybody have practical experience if using OTV for DCI how to achive
HSRP localisation (I assume with an acl/policy-map on the overlay-interface which blocks ARPs für common standby-IP-address as well as HSRP-Hellos)
Reducing ARP over overlay-interface (I assume proxy arp is used)
Limiting Broadcast/Multicast over the overlay (I assume this done by a policy-map on the overlay interface which limits broadcast)
Thx in Advance
Hubert
05-05-2011 05:19 AM
Hi Hubert
You'll find a sample configuration for FHRP in the OTV Design Guide:
Regarding ARP: This is optimezed with the use of ARP Neighbor-Discovery (ND) cache within OTV - This feature is also explained in the guide linked above.
HTH
Marcel
05-05-2011 09:48 PM
Hi Marcel,
thx very useful link.
any idea about Bcast-limitation, seem is not supported at the moment. I think the only way would be to configure storm-control on internl interface, with the disadvantage that the is no way to do it per VLAN.
KR
Hubert
05-06-2011 12:58 AM
hello hubert
yes I agree with you. I seems like we have to deal with it :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide