06-11-2024 07:02 AM
Hi
We are looking for recommendations for replacing our existing N7K.
Is someone able to guide us in the right direction...
This is the current build:
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 48 1/10 Gbps BASE-T Ethernet Module N7K-F248XT-25E ok
2 48 1/10 Gbps BASE-T Ethernet Module N7K-F248XT-25E ok
3 48 1/10 Gbps BASE-T Ethernet Module N7K-F248XT-25E ok
4 48 1/10 Gbps BASE-T Ethernet Module N7K-F248XT-25E ok
5 0 Supervisor Module-2 N7K-SUP2E active *
6 0 Supervisor Module-2 N7K-SUP2E ha-standby
7 48 1/10 Gbps Ethernet Module N7K-F248XP-25E ok
Many thanks
06-11-2024 07:45 AM
- FYI : https://www.cisco.com/c/en/us/products/switches/switch-selector.html?guide=data_center|lantype|lanupgrade|nexus_7000#~select-switch
Scroll down too!
M.
06-11-2024 09:21 AM
Hi,
The 9400 should be a good replacement for the 7K, since you only need Ethernet modules. See datasheet:
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide