We recently bought CISCO4500X Switches and planning to configure them as core switches. Unfortunately, these swithces are not supporting NAT.
Here is the sh version result. Is this because of hardware limitation or IOS ?. Will it be resolved if we upgrade the license ?. if yes, What license.. Any suggestion ?. Please.!
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.04.02.SG RELEASE SOFTWARE (fc1)
Technical Support: _http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 05-Sep-13 19:06 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010, 2012 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
CORE-SWITCH32 uptime is 5 days, 2 hours, 37 minutes
Uptime for this control processor is 4 days, 9 hours, 18 minutes
System returned to ROM by SSO Switchover
Running default software
Jawa Revision 2, Winter Revision 0x0.0x1C
Last reload reason: Stateful Switchover
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
License Information for 'WS-C4500X-32'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
cisco WS-C4500X-32 (MPC8572) processor (revision 4) with 4194304K/20480K bytes of memory.
Processor board ID XXXXXXXXX
MPC8572 CPU at 1.5GHz, Cisco Catalyst 4500X
Last reset from Reload
6 Virtual Ethernet interfaces
80 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
take a look here for the NAT support on 4500
Don't forget to rate helpful posts.