05-06-2015 01:36 AM - edited 03-07-2019 11:53 PM
Hi,
I have created a website ( http://192.168.1.1/omniwebclient/webform/1home ) which i am able to access in my local network.
NOW,
same website link i want to access over internet. i done NAT on my cisco 2600 Internet router but then to i am not able to access on internet.
NAT Conifig.
int serial 0/0
ip address 10.240.174.195 255.255.255.252
ip nat outside
exit
int eth0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
exit
ip nat inside source static 192.168.1.1 10.240.174.195
NOTE:- This internet link connected to ASA through router.
Please help me with this..........????
05-06-2015 03:49 AM
You need a public IP to access the server from the internet.
The IP 10.240.174.195 is still a private IP so you can't get to this from the internet.
Jon
05-06-2015 07:25 AM
i have a public ip,
my public ip is:- 151.248.100.175
05-06-2015 07:44 AM
Okay , firstly can you blank out the middle octets in your last post ie. 151.x.x.175 as this is a public forum.
Secondly I have just done a ping to that IP and got a response so what is that IP assigned to ?
Can you show the network setup you have ?
Jon
05-07-2015 07:49 AM
the ip which i given in this forum that is a just a random ip . which not use in my network.
05-07-2015 07:56 AM
Okay, that wasn't a particularly sensible thing to do.
Regardless if you want help then answer the questions ie. from your configuration everything is using private IPs but you say you have a public IP.
Where is this IP assigned ?
How does your network look ?
etc etc...
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide