cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

471
Views
4
Helpful
4
Replies
Beginner

NAT "reversible" keyword command in ASR 1001

Hello All,

  I'm having an issue with copying an cisco IOS command regarding NAT reversible to a cisco IOS XE on ASR

 

I’m having trouble copying a command which is on IOS to IOS XE.

 

The below command is taken in normal IOS – 7206

ip nat inside source static 10.101.1.7 110.100.1.7 route-map ALPHA reversible.

 

However, in IOS –XE on ASR 1001 it’s not working.

 

euma-fr-tipic-th2-01(config)#ip nat inside source static 10.101.1.7 110.100.1.7 route-map ALPHA reversible

                                                                                                                                                           ^

% Invalid input detected at '^' marker.

 

I wanted to know if  IOS XE by default considers the “reversible” keyword command for outside-to-inside translation for static NAT ?

Or if the IOS XE does not support the “reversible” keyword in static NAT at all?

Can someone please let me know what is the equivalent command in IOS XE?

Thanks in advance..

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

According with ASR Nat

According with ASR Nat trouble-shooting Guide:
Starting with release XE 3.1.1 reversible becomes the default behavior with static route-maps (to align with general static behavior). No keyword is necessary to obtain this behavior.

hope this help, please let us know your findings.
4 REPLIES 4
Beginner

Hello!!!!Any one has

Hello!!!!

Any one has experience on the ASR IOS XE?

Beginner

Same issue moving code from a

Same issue moving code from a ISR3925 G2 to a 4451 ISR running IOS XE.. I depend on the reversible function. Trying to get a TAC answer this week.

Nick

Highlighted
Cisco Employee

According with ASR Nat

According with ASR Nat trouble-shooting Guide:
Starting with release XE 3.1.1 reversible becomes the default behavior with static route-maps (to align with general static behavior). No keyword is necessary to obtain this behavior.

hope this help, please let us know your findings.
Beginner

thank you all for your reply.

thank you all for your reply. Yes I agree No reversible Keyword is necessary after XE 3.1.1 release.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards