Net selection in communication between switches

[Alzor]

Hi all,

First of all, I have to say that I am new at the network area and I have poor knowledge of them.

To make you a picture, I am working with several switches and networks, let's say switches SG-200-28 and SG-350-28P and the networs 192.168.1.xx, 192.168.2.xx and 172.20.0.xx for example.

The problem is that I have 2 cases of work:

  "stand-alone-mode" where in each switch will be a connect equipments to the net 172..... with the same IPs and I only need to share the 192 net.

"Link-mode" where I have to disable one of the 172... net in one switch and start to share the other between the switches.

I have been reading that the way to manage the case of have sames IPs is with virtual LAN and Private Virtual LAN, but I dont know if I will be able to stay changing between modes and the way to configure the VLANs.

Any Idea?

Thanks all.

[luis_cordova]

Hi @Alzor ,

Check this link, maybe can give some help:

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-200-series-smart-switches/smb80-vlan-configuration-on-the-200-300-series-managed-switches.html

https://community.cisco.com/t5/small-business-switches/sg300-28-inter-vlan-routing/td-p/2459569

Regards

[Alzor]

up!

[luis_cordova]

Hi @Alzor ,

I'm glad your problem has been fixed.

Remember to mark the correct answers as solved, since that helps other users with similar doubts

Regards

[Alzor]

Thanks for the info, but is not fixed =(.