10-15-2014 10:46 PM - edited 03-07-2019 09:08 PM
Hello Dears
Your assistance so appreciated !
I have configured Netflow on my switch c3750x ios (15.0(2)) , as the following configuration :
but from my solarwind netflow analyzer , said that ( Data is not available ) . just please help to solve what the issue ?
10-16-2014 06:35 AM
1- Check if UDP 2055 port is allowed on your firewall
2-your analyzer must be configured to accept incoming flow, check its configuration.
3- check your netflow version on your switch and server
10-16-2014 06:53 AM
Can you do the following command and provide the output please:
show flow exporter Netflow-to-Solar
Thanks,
Manny
10-16-2014 08:50 AM
Can you also confirm that you have the C3KX-SM-10G services module?
10-16-2014 11:16 PM
Dear
Actually no , because i am using c3kx-nm-10g , this service module not support netflow ?
10-23-2014 07:51 AM
Check out this link and it should clear up the difference between the C3kx-nm-10g and C3kx-sm-10g
https://supportforums.cisco.com/ru/discussion/11568246
10-23-2014 11:15 AM
Correct - the plain 10 Gbps network module does not add Netflow support on the Catalyst 3650X. You need the service module ("c3kx-sm-10g") as it has the necessary ASIC built-in.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide