Dear All,
I need to activate netflow on Cisco 3750.
when i checked show flowcontrol i see the flowcontrol is unsupported. Please let me know how to activate the same.
eash
L3SW#sh flowcontrol
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
--------- -------- -------- -------- -------- ------- -------
Fa1/0/1 Unsupp. Unsupp. off off 0 0
Fa1/0/2 Unsupp. Unsupp. off off 0 0
Fa1/0/3 Unsupp. Unsupp. off off 0 0
Fa1/0/4 Unsupp. Unsupp. off off 0 0
Fa1/0/5 Unsupp. Unsupp. off off 0 0
Fa1/0/6 Unsupp. Unsupp. off off 0 0
Fa1/0/7 Unsupp. Unsupp. off off 0 0
Fa1/0/8 Unsupp. Unsupp. off off 0 0
Fa1/0/9 Unsupp. Unsupp. off off 0 0
Fa1/0/10 Unsupp. Unsupp. off off 0 0
Fa1/0/11 Unsupp. Unsupp. off off 0 0
Fa1/0/12 Unsupp. Unsupp. off off 0 0
Fa1/0/13 Unsupp. Unsupp. off off 0 0
Fa1/0/14 Unsupp. Unsupp. off off 0 0
Fa1/0/15 Unsupp. Unsupp. off off 0 0
Fa1/0/16 Unsupp. Unsupp. off off 0 0
Fa1/0/17 Unsupp. Unsupp. off off 0 0
Fa1/0/18 Unsupp. Unsupp. off off 0 0
Fa1/0/19 Unsupp. Unsupp. off off 0 0
Fa1/0/20 Unsupp. Unsupp. off off 0 0
Fa1/0/21 Unsupp. Unsupp. off off 0 0
Fa1/0/22 Unsupp. Unsupp. off off 0 0
Fa1/0/23 Unsupp. Unsupp. off off 0 0
Fa1/0/24 Unsupp. Unsupp. off off 0 0
Gi1/0/1 Unsupp. Unsupp. off off 0 0
Gi1/0/2 Unsupp. Unsupp. off off 0 0
