07-28-2020 08:09 AM - edited 07-28-2020 08:09 AM
Dear All,
I am missing something but what is it? Not getting any idea. I am configuring Netflow 9 and I am not getting top-talker on the prtg.
flow record frPrtg
description Prtg
match ipv4 tos
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
collect transport tcp flags
collect counter bytes
collect counter packets
collect timestamp sys-uptime first
collect timestamp sys-uptime last
!
flow exporter fePrtg-1
description WAN-traffic--Prtg
destination x.x.x.x
source Vlanxx
transport udp 9993
template data timeout 1200
option interface-table timeout 3600
option exporter-stats timeout 60
!
flow monitor fmPrtg-1
description WAN-traffic-Prtg
exporter fePrtg-1
cache timeout active 60
record frPrtg
!
can you guide me if I am missing anything?
Solved! Go to Solution.
07-28-2020 08:45 AM
Hi,
Have you added "ip flow monitor ....input and output to the interfaces?
Also, you may want to add these and test again:
collect counter bytes long
collect counter packets long
collect counter bytes rate
HTH
07-30-2020 10:11 AM
Thanks for the reply. I really appreciate your support.
It was an issue with the PRTG team and the sensor was not enabled properly. Thanks again.
07-28-2020 08:45 AM
Hi,
Have you added "ip flow monitor ....input and output to the interfaces?
Also, you may want to add these and test again:
collect counter bytes long
collect counter packets long
collect counter bytes rate
HTH
07-28-2020 11:13 AM
flow exporter fePrtg-1
description WAN-traffic--Prtg
destination x.x.x.x
source Vlanxx
no transport udp 9993 < is this configured other side (or try port below to work)
transport udp 2055
export-protocol netflow-v9
interface te 1/1/1
ip flow monitor XXXXXXXXX input
07-30-2020 10:11 AM
Thanks for the reply. I really appreciate your support.
It was an issue with the PRTG team and the sensor was not enabled properly. Thanks again.
07-30-2020 10:13 AM
Thanks for the feedback!
Glad to know the issue has been resolved.
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide