cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
200
Views
0
Helpful
1
Replies

Network Connectivity Help

patel.nishit
Level 1
Level 1

We have issues with my Cluster server not being able to ping server on the same subnet

Cluster server is patched to core switches and this is a physical HP blade server

I was able to ping the gateway address: 10.55.0.1 but was unable to ping: 10.55.0.134

or any other server on the same server, which is as you see on the same subnet and VLAN

I have attached ping and tracert results as you can see what is happening.

1 Reply 1

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Patel,

in order to be able to help, you should provide some more info:

a)how is this server connected to the core switches: is any form of NIC teaming in use ?

b) how is the cluster managed, have you got CSM or ACE load balancers blades on the core switches ?

in this case the IP subnet could be logically divided in two parts with the CSM in the middle (CSM in bridged mode) for example.

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: