09-10-2013 08:42 PM - edited 03-07-2019 03:24 PM
Hi All,
I am going to upgrade our existing router's ios from "c2951-universalk9-mz.SPA.150-1.M6.bin" to c2951-universalk9-mz.SPA.152-4.M4.bin,
I would to check if the existing services will all be supported by the new ios and How about these
6 -rw- 1697952 Jul 12 2011 15:09:30 +08:00 securedesktop-ios-3.1.1.4-5-k9.pkg
7 -rw- 415956 Jul 12 2011 15:09:40 +08:00 sslclient-win-1.1.4.176.pkg.
I am not using them now, but i may be using them in future. In this case, my new ios support thesetwo or i have to upgrade them as well?
Thanks in advance.
09-10-2013 10:12 PM
You should be fine with this upgrade as you planned. No need to worry about those specially if you are not using it. Upgraded image should have similar packages.
HTH
Rasika
09-11-2013 12:08 AM
No worries you are fine with the upgrade IOS, there are few new features added in that thats it.
http://tools.cisco.com/ITDIT/CFN/jsp/compareImages.jsp
Please rate the helpfull posts.
Naidu.
09-11-2013 01:03 AM
Hi Rasika & Letchum, Thanks for the reply. I am, actually, intersted in these two images:
6 -rw- 1697952 Jul 12 2011 15:09:30 +08:00 securedesktop-ios-3.1.1.4-5-k9.pkg
7 -rw- 415956 Jul 12 2011 15:09:40 +08:00 sslclient-win-1.1.4.176.pkg.
Does my new ios support this above mentioned packages? if not, what is the compatible packages for the 15.2(4)M4
c2951-universalk9-mz.SPA.152-4.M4.bin15? Thanks in advance.
Best Regards
Ratnam
09-11-2013 01:09 AM
Make sure you have enough DRAM and Flash.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: