cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1344
Views
0
Helpful
9
Replies
Beginner

Nexus 2000 dynamic-pinning

Does anyone have any info on how to configure dynamic-pinning, instead of static pinning on a Nexus 2224 connected to a 7009?

Can't seem to find anything on CCO!

Cheers

Colin

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Cisco Employee

Nexus 2000 dynamic-pinning

Default configuration will do that. You don't have to configure anything.

Regards,

jerry

View solution in original post

Highlighted
Cisco Employee

Nexus 2000 dynamic-pinning

That is correct.

Regards,

jerry

View solution in original post

9 REPLIES 9
Highlighted
VIP Expert

Nexus 2000 dynamic-pinning

I don't think you can change that.  The only option I see under for example fex 101 is Fex max-link. And "sh fex det" show that the pinning is static

HTH

Highlighted
Beginner

Nexus 2000 dynamic-pinning

Was just reading that this is an option, in place of static pinning.

Reason is that if an uplink fails, the ports still have connectivity.

maybe a new feature then?

Highlighted
VIP Expert

Nexus 2000 dynamic-pinning

Maybe, but I am running 6.1.1 and I don't see it.  Did the doc say what version of code should have it?

Highlighted
Beginner

Nexus 2000 dynamic-pinning

Its mentioned in the Designing Cisco Network Architectures (ARCH) book by John Tiso!

Highlighted
Cisco Employee

Nexus 2000 dynamic-pinning

Do you mean if a uplink failed, you want all traffic to moved the another fabric interface?

Regards,

jerry

Highlighted
Beginner

Nexus 2000 dynamic-pinning

yes, that would be the reason

Highlighted
Cisco Employee

Nexus 2000 dynamic-pinning

Default configuration will do that. You don't have to configure anything.

Regards,

jerry

View solution in original post

Highlighted
Beginner

Nexus 2000 dynamic-pinning

is that using the command "pinning max-links 1" ?

Highlighted
Cisco Employee

Nexus 2000 dynamic-pinning

That is correct.

Regards,

jerry

View solution in original post

CreatePlease to create content
Content for Community-Ad