cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1811
Views
0
Helpful
9
Replies

Nexus 2000 dynamic-pinning

c.walsh
Level 3
Level 3

Does anyone have any info on how to configure dynamic-pinning, instead of static pinning on a Nexus 2224 connected to a 7009?

Can't seem to find anything on CCO!

Cheers

Colin

2 Accepted Solutions

Accepted Solutions

Default configuration will do that. You don't have to configure anything.

Regards,

jerry

View solution in original post

That is correct.

Regards,

jerry

View solution in original post

9 Replies 9

Reza Sharifi
Hall of Fame
Hall of Fame

I don't think you can change that.  The only option I see under for example fex 101 is Fex max-link. And "sh fex det" show that the pinning is static

HTH

Was just reading that this is an option, in place of static pinning.

Reason is that if an uplink fails, the ports still have connectivity.

maybe a new feature then?

Maybe, but I am running 6.1.1 and I don't see it.  Did the doc say what version of code should have it?

Its mentioned in the Designing Cisco Network Architectures (ARCH) book by John Tiso!

Do you mean if a uplink failed, you want all traffic to moved the another fabric interface?

Regards,

jerry

yes, that would be the reason

Default configuration will do that. You don't have to configure anything.

Regards,

jerry

is that using the command "pinning max-links 1" ?

That is correct.

Regards,

jerry

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: