09-24-2010 02:36 AM - edited 03-06-2019 01:10 PM
Hello,
I have the following configuration for NEXUS 2000 single homed :
interface port-channel103
switchport mode fex-fabric
fex associate 103
Does the best practice is to configure this port-channel in trunk and define the vlans allowed or keep it like this ?.
Thanks a lot,
Regards
David.
09-24-2010 07:00 PM
Hi David,
What you have configured is good. Think the Fex-fabric ports as a internal path between N5K and N2K, just like the path between supervisor and a line card. You don't need to configure trunk or access mode on it.
HTH,
Lei Tian
09-25-2010 01:41 AM
Hello,
Thank you for your feedback,
David.
Date: Fri, 24 Sep 2010 20:00:29 -0600
From: supportforums-donotreply@jivesoftware.com
To: davidguigo@hotmail.com
Subject: New message: "NEXUS 2000 : interface port-channel103"
DAVID GUIGO,
A new message was posted in the Discussion thread "NEXUS 2000 : interface port-channel103":
https://supportforums.cisco.com/message/3187875#3187875
Author : Lei Tian
Profile : https://supportforums.cisco.com/people/letian
Message:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide