cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

4484
Views
0
Helpful
6
Replies
Highlighted
Beginner

Nexus 2232 stuck on image download

sh fex

  FEX         FEX           FEX                       FEX              

Number    Description      State            Model            Serial    

------------------------------------------------------------------------

105        FEX0105        Image Download  N2K-C2232TM-E-10GE  

sh fex

  FEX         FEX           FEX                       FEX              

Number    Description      State            Model            Serial    

------------------------------------------------------------------------

105        FEX0105               Offline  N2K-C2232TM-E-10GE

sh fex detail

FEX: 105 Description: FEX0105   state: Image Download

  FEX version: 5.2(1)N1(1) [Switch version: 5.1(3)N2(1)]

  FEX Interim version: 5.2(1)N1(1)

  Switch Interim version: 5.1(3)N2(1)

  Module Sw Gen: 12594  [Switch Sw Gen: 21]

  post level: complete

pinning-mode: static    Max-links: 1

  Fabric port for control traffic: Eth1/30

  FCoE Admin: false

  FCoE Oper: true

  FCoE FEX AA Configured: false

  Fabric interface state:

    Eth1/30 - Interface Up. State: Active

  Fex Port        State  Fabric Port

Logs:

05/09/2013 15:07:12.422897: Requesting satellite to download image

05/09/2013 15:08:00.845430: Module register received

05/09/2013 15:08:00.846096: Registration response sent

05/09/2013 15:08:00.846355: Requesting satellite to download image

05/09/2013 15:08:43.451649: Module register received

05/09/2013 15:08:43.452430: Registration response sent

05/09/2013 15:08:43.452689: Requesting satellite to download image

05/09/2013 15:09:33.886198: Module register received

05/09/2013 15:09:33.887064: Registration response sent

05/09/2013 15:09:33.887417: Requesting satellite to download image

05/09/2013 15:10:32.17131: Module register received

05/09/2013 15:10:32.17798: Registration response sent

05/09/2013 15:10:32.18049: Requesting satellite to download image

05/09/2013 15:11:04.511120: Module register received

05/09/2013 15:11:04.511781: Registration response sent

05/09/2013 15:11:04.512054: Requesting satellite to download image

05/09/2013 15:11:38.805792: Module register received

05/09/2013 15:11:38.806668: Registration response sent

05/09/2013 15:11:38.807026: Requesting satellite to download image

05/09/2013 15:12:15.70054: Module register received

05/09/2013 15:12:15.70717: Registration response sent

05/09/2013 15:12:15.70989: Requesting satellite to download image

05/09/2013 15:12:53.104690: Module register received

05/09/2013 15:12:53.105354: Registration response sent

05/09/2013 15:12:53.105624: Requesting satellite to download image

05/09/2013 15:13:33.379258: Module register received

05/09/2013 15:13:33.380045: Registration response sent

05/09/2013 15:13:33.380306: Requesting satellite to download image

05/09/2013 15:14:15.661734: Module register received

05/09/2013 15:14:15.662512: Registration response sent

05/09/2013 15:14:15.662771: Requesting satellite to download image

05/09/2013 15:14:59.789993: Module register received

05/09/2013 15:14:59.790835: Registration response sent

05/09/2013 15:14:59.791094: Requesting satellite to download image

05/09/2013 15:15:30.245883: Deleting route to FEX

05/09/2013 15:15:30.253193: Module disconnected

05/09/2013 15:15:30.255081: Module Offline

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Engager

Nexus 2232 stuck on image download

Hi,

The N2K-C2232TM-E-10GE is not supported in NX-OS 5.1(3)N2(1). As per Table 2 in the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes the first release supported is 5.2(1)N1(1).

The FEX already have this release installed as seen from the show fex detail. You'll have to upgrade the Nexus 5000 to support these FEX.

Regards

View solution in original post

6 REPLIES 6
Beginner

Nexus 2232 stuck on image download

I am assuming you have a nexus 5K with these FEXs?

if so, what is the version of software on the 5K?

Beginner

Nexus 2232 stuck on image download

Yes its a 5k. sorry forgot to post the software version for the 5k

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html

Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html.

Software

  BIOS:      version 3.5.0

  loader:    version N/A

  kickstart: version 5.1(3)N2(1)

  system:    version 5.1(3)N2(1)

  power-seq: Module 1: version v1.0

             Module 2: version v1.0

             Module 3: version v2.0

  uC:        version v1.2.0.1

  SFP uC:    Module 1: v1.0.0.0

Beginner

Nexus 2232 stuck on image download

I believe if you go with 5.1.3 it should work.

5k should be the same or higher os version.

or upgrade 5k to 5.2(1) first, same as you are trying to upgrade to on the FEXs.

Engager

Nexus 2232 stuck on image download

Hi,

The N2K-C2232TM-E-10GE is not supported in NX-OS 5.1(3)N2(1). As per Table 2 in the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes the first release supported is 5.2(1)N1(1).

The FEX already have this release installed as seen from the show fex detail. You'll have to upgrade the Nexus 5000 to support these FEX.

Regards

View solution in original post

Beginner

Nexus 2232 stuck on image download

ty steve ill give that a go. appreciate both you guys help

Engager

Nexus 2232 stuck on image download

Glad to be of help. Thanks for the rating.

Regards

CreatePlease to create content
Content for Community-Ad