Nexus 3064 Firmware nxos.7.0.3.I4.6.bin

[stein9700]

I have a Nexus 3064 I want to firmware to nxos.7.0.3.I4.6, direction say I need to Compact the image.

My 3k does not have the option.

old# copy scp:nxos.7.0.3.I4.6.bin bootflash:nxos.7.0.3.I4.6.bin ?
<CR>
source-interface Select source interface
vrf Display per-VRF information

Even on the other 3k I have which is running 7.0.3.l4.6 it doesn't have compact.

I assume I need to compact the bin file because there is not much room in the bootflash:

Question:

How do I compact the bin file without the compact option?

Usage for bootflash://
1060913152 bytes used
589991936 bytes free
1650905088 bytes total

Here is the current version

Software
BIOS: version 2.8.0
loader: version N/A
kickstart: version 6.0(2)U6(7)
system: version 6.0(2)U6(7)
Power Sequencer Firmware:
Module 1: version v1.0
SFP uC: version 2.12

BIOS compile time: 12/22/2015
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U6.7.bin
kickstart compile time: 7/28/2016 9:00:00 [07/28/2016 16:40:23]
system image file is: bootflash:///n3000-uk9.6.0.2.U6.7.bin
system compile time: 7/28/2016 9:00:00 [07/28/2016 17:12:38]

Hardware
cisco Nexus 3064 Chassis ("48x10GE + 4x40G Supervisor")
Intel(R) Celeron(R) CPU P4505 @ 1.87GHz with 3665240 kB of memory.
bootflash: 2007040 kB

[Reza Sharifi]

What is the size if the new image you are trying to load?

[stein9700]

Here you go

698629632    May 18 15:07:27 2018  nxos.7.0.3.I4.6.bin

[Reza Sharifi]

Yes, that is not enough space.

Have a look at this link and look for 

Compressing and Uncompressing Files

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/fundamentals/b_Nexus_3000_Fundamentals_Guide_Release_503_U1_1/b_Nexus_3000_Fundamentals_Guide_Release_503_U1_2_chapter_0100.html#con_1238884

HTH

[stein9700]

So that worked but I still don't have enough space to upgrade the Switch.

Not sure how to get to nxos.7.0.3.I4.6.bin

thanks