cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1162
Views
0
Helpful
3
Replies

Nexus 5000 and Fabric interconnect

Does anybody know how to properly power down the Nexus 5000 and the fabric interconnect switches? I have looked up and down cisco's and google web for steps, but they are all comming back with the answer to just disconnect the power cables after you have power down all the windows os and exs servers. Before i do that, I just wanted to make sure that that's the correct way to do it or if there are actuall commands that I will need to run on the devices to properly power down. I know that the FI do have a command to reboot, but i need them to completely be power down. Any help would be appreciated.                   

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Correct, 5Ks and 2ks don't have a switch that you can turn off.  So, you just have to unplug the power cord.  Make sure to save your configs before doing that.

HTH

View solution in original post

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

Correct, 5Ks and 2ks don't have a switch that you can turn off.  So, you just have to unplug the power cord.  Make sure to save your configs before doing that.

HTH

Cool. Thank you.

Thanks for the rating.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: