05-16-2012 07:36 AM - edited 03-07-2019 06:44 AM
Being the first time I have worked on these is all you have to do to manage the box is like any other switch where you just create a SVI with an address and add the default static pointing to the gateway ? These are a little different that's for sure.
05-16-2012 08:26 AM
Glen,
Yes these switches are a little different. To answer your question you can set the IP like this:
hostname [hostname]
ip host [hostname] [IP ADDRESS]
ip route 0.0.0.0/0 [gateway]
These are just some of the basics to get you going. I hope this helps.
Thanks and Cheers!
Kimberly
Please remember to rate helpful posts.
05-16-2012 09:07 AM
Yeah we are just seeing some strange stuff , we have 2 nexus 5000's connected via the peer links. Have an SVi vlan 712 on both configured with different addresses in the same range going to a couple of firewalls which is the gateway for that Network management space. For some reason we can only get to one of the 5000's at a time and can't figure out why at this point . 5000's are peered ok from what i can tell and all fex's look ok.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: