cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1322
Views
0
Helpful
2
Replies

Nexus 5010 Rebooted Itself

Our Data Center Switch (5010) rebooted itself today, underneath the captured screen

_____________________________________________________________________________________________________________________________

NX5010-1(config-vlan)#

Broadcast message from root (console) (Sun Feb 10 14:22:41 2013):

The system is going down for reboot NOW!

NX5010-1# sh system reset-reason

----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---

1) At 740938 usecs after Sun Feb 10 14:22:41 2013

    Reason: Reset triggered due to HA policy of Reset

    Service: nohms hap reset

    Version: 5.0(2)N1(1)

2) No time

    Reason: Unknown

    Service:

    Version: 5.0(2)N1(1)

3) At 395739 usecs after Tue Mar 29 15:55:47 2011

    Reason: Reset Requested by CLI command reload

    Service:

    Version: 5.0(2)N1(1)

4) At 152241 usecs after Tue Mar 29 15:12:42 2011

    Reason: Reset by installer

    Service:

    Version: 4.1(3)N2(1a)

NX5010-1#  sh ver

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html.

Software

  BIOS:      version 1.3.0

  loader:    version N/A

  kickstart: version 5.0(2)N1(1)

  system:    version 5.0(2)N1(1)

  power-seq: version v1.2

  BIOS compile time:       09/08/09

  kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.2.N1.1.bin

  kickstart compile time:  10/15/2010 0:00:00 [10/15/2010 11:00:43]

  system image file is:    bootflash:/n5000-uk9.5.0.2.N1.1.bin

  system compile time:     10/15/2010 0:00:00 [10/15/2010 12:34:05]

Hardware

  cisco Nexus5010 Chassis ("20x10GE/Supervisor")

  Intel(R) Celeron(R) M CPU    with 2073416 kB of memory.

  Processor Board ID JAF1411ARKA

  Device name: NX5010-1

  bootflash:    1003520 kB

Kernel uptime is 0 day(s), 3 hour(s), 26 minute(s), 27 second(s)

Last reset at 740938 usecs after  Sun Feb 10 14:22:41 2013

  Reason: Reset triggered due to HA policy of Reset

  System version: 5.0(2)N1(1)

  Service: nohms hap reset

plugin

  Core Plugin, Ethernet Plugin

NX5010-1#

_____________________________________________________________________________________________________________________________

Hoping to receive a feedback and comment at earlies.

Regards,

2 Replies 2

packettracer86
Level 1
Level 1

Hi,

what have you done right before the Reboot happened?

Just added one vlan on both NX5010-1 and

NX5010-2, after 8 minutes

NX5010-1 rebooted itself.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card