03-07-2011 10:15 AM - edited 03-06-2019 03:56 PM
so I know that v4 doesn't but does the new NX-OS support switching/routing between VLANs? if I anchored 2 VLANs at SVIs on the 5010 does the new NX-OS have any ability to pass traffic between them, or do I still have to leave the 5010 and head for my 4506 to get from one VLAN to the next?
thanks in advance.
Solved! Go to Solution.
03-07-2011 11:35 AM
The 5010 and 5020 will not route traffic between SVI's. You will need the 5548 with the L3 module for routing on the Nexus 5548 switches. Otherwise you need to uplink to a L3 switch.
03-07-2011 11:35 AM
The 5010 and 5020 will not route traffic between SVI's. You will need the 5548 with the L3 module for routing on the Nexus 5548 switches. Otherwise you need to uplink to a L3 switch.
03-07-2011 11:39 AM
Guess I was hoping more than anything. Cisco Rep & SE made the 5500 L3 pitch but that was after selling the 5k/2k package.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide