Just recently enable VPC on Nexus (5010 & 2148T) switches, it went well and working fine. However when we do the underneath, issue occur.
Restart the Server - when we restart/shutdown & turn on the server, its unreachable (you could not ping it).
Upong verification both interfaces in Nexus 5010-1 & Nexus 5010-2 are up, VPCs & port-channel are also up
Workaround - shutdown the Nexus 5010-2 (role is secondary) physical port and enable it again - operation back to normal.
When you shutdown one of the VPC member interface (either in Nexus 5010-1 or Nexus 5010-2) where the Server is connected - Server is still reachable, however when you Enable it, issue arrise and Server is unreachable
Workaround - remove the channel group of both interfaces and remove the port-channel as well, and start again the VPC configuration.
I also attached the VPC configuration for reference.
Hello!I make syslogcollector + RESTAPI for collect syslog messages.It have next iterested features:1. Can recognise header from Cisco/Moxa and more devices and write it in dedicated field2. Have API for integrated with other tools3. Work with Mongodb4. We...
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...