03-04-2013 11:39 AM - edited 03-07-2019 12:02 PM
Hi experts,
I have a customer who is having some issues with 5m passive HP twinax cables, 537965-001, with a Chelsio 10G NIC. Aside from NIC driver issue, if NX-OS recognizes this SFP+, should it be expected to work in a 5020 running 4.2(1)N1(1)? Does anyone know whether Cisco has certified passive HP twinax cables? I have included output to 'transceiver details' to a Cisco twinax and the HP (WL GORE) cables. Thanks.
Addy
Nexus5020# show interface eth 1/7 transceiver details
Ethernet1/7
sfp is present
name is CISCO-MOLEX
type is SFP-H10GB-CU3M
part number is 74752-9045
revision is 07
serial number is MOC15043853
nominal bitrate is 10300 MBits/sec
Link length supported for copper is 3 m(s)
cisco id is --
cisco extended id number is 4
SFP calibration is invalid
Nexus5020# show interface eth 1/8 transceiver details
Ethernet1/8
sfp is present
name is WL GORE
type is 10Gbase-(unknown)
part number is 537965-001
revision is C
serial number is 052010-005
nominal bitrate is 10300 MBits/sec
Link length supported for copper is 5 m(s)
cisco id is --
cisco extended id number is 4
SFP calibration is invalid
03-04-2013 12:37 PM
should it be expected to work in a 5020 running 4.2(1)N1(1)?
IF the twinax cable does not have a Cisco logo on it, it won't work.
03-09-2013 09:18 AM
Hi Addy,
The list of Cisco certified Twinax cables can be found in the Twinax Cables Certification Matrix for Cisco Nexus 2000 and Nexus 5000 Series Switches Data Sheet.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide