Hi Tilak, I have created the

Philip T Kurien · ‎10-13-2014

HI,

i have a nexus 5596 where the SIV will not come up. Some logs are as below. Any help will be appreciated.

Rgrds,

Philip.

sh ip int br
IP Interface Status for VRF "default"(1)
Interface IP Address Interface Status
Vlan175 10.9.175.5 protocol-down/link-down/admin-up
------------------------------------------------------------------------------

NXSRAGG02# sh version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
BIOS: version 3.6.0
loader: version N/A
kickstart: version 5.2(1)N1(7)
system: version 5.2(1)N1(7)
power-seq: Module 1: version v5.0
Module 2: version v1.0
uC: version v1.0.0.2
SFP uC: Module 1: v1.1.0.0
BIOS compile time: 05/09/2012
kickstart image file is: bootflash:///n5000-uk9-kickstart.5.2.1.N1.7.bin
kickstart compile time: 2/4/2014 23:00:00 [02/05/2014 08:58:28]
system image file is: bootflash:///n5000-uk9.5.2.1.N1.7.bin
system compile time: 2/4/2014 23:00:00 [02/05/2014 11:27:58]

Hardware
cisco Nexus5596 Chassis ("O2 48X10GE/Modular Supervisor")
Intel(R) Xeon(R) CPU with 8263828 kB of memory.
Processor Board ID FOC17515MFL

Device name: NXSRAGG02
bootflash: 2007040 kB

Kernel uptime is 0 day(s), 0 hour(s), 56 minute(s), 50 second(s)

Last reset at 578014 usecs after Wed Aug 26 08:56:11 2009

Reason: Reset Requested by CLI command reload
System version: 5.2(1)N1(7)
Service:

plugin
Core Plugin, Ethernet Plugin

--------------------------------------------------------------------------------

NXSRAGG02# sh module
Mod Ports Module-Type Model Status
--- ----- --------------------------------- ---------------------- ------------
1 48 O2 48X10GE/Modular Supervisor N5K-C5596UP-SUP active *
2 0 O2 GEM with L3 ASIC N55-M160L3 ok

Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ --------------------------------------------------
1 5.2(1)N1(7) 1.0 --
2 5.2(1)N1(7) 1.0 --

Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 002a.6a9c.2408 to 002a.6a9c.2437 FOC17515MFL
2 0000.0000.0000 to 0000.0000.000f FOC17460D18

-----------------------------------------------------------------------------------

NXSRAGG02# sh license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
FCOE_NPV_PKG No - Unused -
FM_SERVER_PKG No - Unused -
ENTERPRISE_PKG No - Unused -
FC_FEATURES_PKG No - Unused -
VMFEX_FEATURE_PKG No - Unused -
ENHANCED_LAYER2_PKG No - Unused -
LAN_BASE_SERVICES_PKG Yes - In use Never -
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused Never -
--------------------------------------------------------------------------------

Rajtilak Sivaluri · ‎10-13-2014

Hi

Not sure how you are saying the interface is not up.

Can you check the show interface status of the VLAN.

Also suggest you to have atleast a interface assigned to this VLAN

Philip T Kurien · ‎10-13-2014

Hi Tilak,

I have created the L2 VLAN. The outputs as follows

NXSRAGG02# sh interface vlan 175
Vlan175 is down, line protocol is down
Hardware is EtherSVI, address is 002a.6a9c.2441
Internet Address is 10.9.175.5/24
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec

NXSRAGG02# sh vl br

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Po2, Po3, Eth1/1, Eth1/2
Eth1/3, Eth1/4, Eth1/5, Eth1/6
Eth1/7, Eth1/8, Eth1/9, Eth1/10
Eth1/14, Eth1/17, Eth1/18
Eth1/19, Eth1/20, Eth1/21
Eth1/22, Eth1/23, Eth1/24
Eth1/25, Eth1/26, Eth1/27
Eth1/28, Eth1/29, Eth1/30
Eth1/31, Eth1/32, Eth1/33
Eth1/34, Eth1/35, Eth1/36
Eth1/37, Eth1/38, Eth1/39
Eth1/40, Eth1/41, Eth1/42
Eth1/43, Eth1/44, Eth1/45
Eth1/46, Eth1/47, Eth1/48
175 SERVER-VLAN1 active Po2, Eth1/29, Eth1/30, Eth1/31
Eth1/32, Eth1/45, Eth1/46
Eth1/47, Eth1/48
176 SERVER-VLAN2 active Po2, Eth1/29, Eth1/30, Eth1/31
Eth1/32, Eth1/45, Eth1/46
Eth1/47, Eth1/48
200 Management active Po2, Eth1/29, Eth1/30, Eth1/31
Eth1/32, Eth1/45, Eth1/46
Eth1/47, Eth1/48

Philip T Kurien · ‎10-13-2014

Hi Tilak,

It is okay now. The peer link was not configured as a trunk. That is why it wasnt coming up.

Thanks & Regards,

Philip.

Rajtilak Sivaluri · ‎10-13-2014

Hi Philip

Good to know !!

Nexus 5596 L3 SVI Interface not coming up