Hi,
I have a current config of a nexus 5k with 3 Fex attached. I wish to add an additional FEX. Other than the standard Switchport mode FEX and FEX associate options, are ther any other things i need to consider before adding an additional FEX. I will just be gving it the next number in my FEx numbering sequence and provisioning a port channel and interfaces prior to connection of the new FEX.
Many thanks
Steve
Solved! Go to Solution.
Hi,
That is correct. You can give the next number in seauance to the new FEX with a new portchannel interface number and the other commands you noted.
HTH
Hi,
That is correct. You can give the next number in seauance to the new FEX with a new portchannel interface number and the other commands you noted.
HTH
Thanks for the info,
that's what I was hoping.
Cheers
Steve