I have been unable to fine any documentation that says that MACsec and OTV are supported on the Nexus 5K. Can anyone clarify if this is supported on the Nexus 5K? Please also provide a link to documentation that describes this support, or lack there of.
Thank you in advance
-- Please remember to select a correct answer and rate helpful posts
I cannot speak for MacSec, however I do know that OTV is only available on the ASR1K and Nexus 7K at the moment. A colleague of mine recently wrote a simple deployment guide for both multicast and unicast OTV.
“Catalyst 8500 Series - Deep Dive”
This event will have place on Tuesday 17th, November 2020 at 10hrs PDT
The Catalyst 8500 Series Edge Platforms are built with the highly programmable, third-generation Cisco Quantum Flow Processor and designed for ...
“Catalyst 8000 Edge Platforms Family Overview”
This event will have place on Wednesday 4th, November 2020 at 10hrs PDT
Designed for an intent-based networks, the Cisco Catalyst 8000 Edge Platforms family offers best-in-class networking and security ...
I'm currently redistributing OSPF to BGP and setting a local pref on the routes. Currently this works fine and having no issues. ip prefix-list ospf-routes seq 10 permit 172.16.100.0/24
route-map ospf-bgp permit 10
match ip address prefix-list ...
Cisco SD-WAN Cloud OnRamp allows you to simplify and secure connectivity to cloud applications and public clouds. Interested in testing out the latest Cisco Cloud OnRamp solutions?
Sign up to try out various use cases with the Cisco SD-WAN Cloud ...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...