12-10-2012 10:49 PM - edited 03-07-2019 10:31 AM
Hi, I am seeing an issue that after deleting/recreating one of the VDC in Nexus 7K, VLAN is not been able to be configured within the VDC although it is not actually a reserved VLAN. Could it be anything missing in the license installation? the version of the image is NX-OS 6.1.2
StorageVDC(config)# vlan 100
^
invalid vlans (reserved values) at '^' marker.
Solved! Go to Solution.
12-27-2012 04:11 AM
Hi Aiqi
If you're trying to configure vlan in FCOE vdc this behavior may be expected.
If you don't use FCOE - please remove fcoe config from VDC:
If you use FCOE in your network please refer to FCOE configuration guide for Nexus 7000 platform
HTH,
Alex
12-27-2012 04:11 AM
Hi Aiqi
If you're trying to configure vlan in FCOE vdc this behavior may be expected.
If you don't use FCOE - please remove fcoe config from VDC:
If you use FCOE in your network please refer to FCOE configuration guide for Nexus 7000 platform
HTH,
Alex
01-10-2013 12:43 AM
yes Oleksandr, I have to allocate fcoe-vlan in default VDC to this specific VDC first
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: