Nexus 99300 install license

[Steev112]

Hi All,

i have two quiries:

1. if i install the license on the switch do i need to reload the box?

2. does this switch support fex?

Thanks

[Terry Cheema · Accepted solution]

1. if i install the license on the switch do i need to reload the box?

There are two ways, either you can order the required license along the hardware and license will come installed or you can do a manual installation, but it doesnt look like you need a reboot. Refer to the below:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/licensing/guide/b_Cisco_NX-OS_Licensing_Guide/b_Cisco_NX-OS_Licensing_Guide_chapter_01.html#con_24916

2. does this switch support fex?

Yes it does.

Ref:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/release/notes/612I31_nxos_rn.html#pgfId-719132

Supported FEX Modules

The following is a list of FEX modules the Cisco NX-OS Release 6.1(2)I3(1) supports with Cisco Nexus 9372PX and 9396PX switches:

• Cisco Nexus 2224TP
• Cisco Nexus 2232PP
• Cisco Nexus 2232TM and 2232TM-E
• Cisco Nexus 2248PQ
• Cisco Nexus 2248TP and 2248TP-E
• B22Dell
• B22HP

-Terry

Please rate all helpful posts

[Steev112]

Hi Terry,

Thanks for your reply is clear now :)

Thanks again